8x930 Family USB Evaluation Kit

USB Functionality:
The 8x930 Family USB Eval Board is designed to implement the functionality of the popular Universal Serial Bus using the 8xC251 core. The board is designed to function with all members of the 8x930 family including HUB and non-HUB devices.

Memory:
The 8x930x USB Eval Board contains 32k bytes of EPROM containing a Reduced Instruction Set Monitor (RISM). It is also equipped with a 128k byte SRAM for use as Program Memory and/or Data Memory. This is in addition to the memory internal to the 8x93xxx chip device.

Two UARTs:
Both the internal UART and a 16C550 external UART are provided with RS232 interfaces to a Host PC or other application.

Software Development Environment:
Intel ApBUILDER is included along with software demo packages. The demo packages currently include compilers, assemblers and debuggers. The demo packages are subject to change without notice.

Power Supply:
The 8x930 Family Eval Board is designed to operate from a single +5 volt regulated supply. FLASH programming is possible by supplying an additional +12 volts. The board is designed to draw less than one amp from the +5 volt supply.


Product Code: USB931EVALKIT - Both 8x930 Evaluation Board and 8x931 Adapter Board