3040 Automatic Whip Antenna
The 3040 Automatic Whip Antenna is a low profile alternative to the highly successful 9350, and operates with both the NGT™ and 2110 family of radios. With a 70% reduction in height and almost half the weight of a 9350, the 3040 provides flexibility to installations.
3040 Automatic Whip AntennaKey Features
2 to 30 MHZ
125 W PE
Fast tuning 1 sec average
Memory tune < 150 m
Supports ALE and frequency hopping mode
Integral Active Wideband Receiver Amplifier for scanning
MIL-STD-810F (Temperature, Immersion, Vibration, Dust)
Designed to MIL-STD-461
Specs
-
Frequency range
2.5 to 30 MHz (2.4 m Whip), 2 to 15 MHz (4.4 m NVIS)
-
Power rating
125 W PEP (voice and data)
-
Power consumption
Typically 0.4 A, less than 0.8 A max
-
Input impedance
50 Ω
-
VSWR
Typically ≤1.5:1
-
Tuning speed
New frequency 1 sec average, memory tune
-
Memory channels
Unlimited
-
Mechanical Temperature rating
–40°C to 70°C, 95% humidity
-
DC operating range
11 to 15.5 V DC (12 V DC nominal)
-
Protection
Open circuit, short circuit, over voltage, over
temperature, voltage transients, high VSWR -
MIL-STD 810F
Temperature, Immersion, Dust, Vibration
-
MIL-STD-461
Designed to standard
-
Dimensions
145 mm W x 165 mm D x 240 mm H
(excludes spring and whip) -
Weight
3.15 kg including spring and whip
-
Mounting
M14 stud, 40 mm long
-
Colour
Black
