Related
Information
Upgrading PSG/ESG Firmware
PSG/ESG Download
Assistant software for MATLAB®
Agilent IO Libraries
Provide
Feedback About Our Signal Generators
Software version 4.2 is a revised version of
IntuiLink for PSG/ESG Signal Generators.
·
Added support for
Options 601 and 602 internal baseband generators with digital bus capability
for the E4438C ESG.
·
Added support for
Option 602 internal baseband generator with digital bus capability for the
E8267C PSG.
·
Added the ability to
upload encrypted waveforms from the signal generator. This gives the user the ability to transfer waveforms from a
signal generator to a computer and
download this waveform to another signal generator.
o
The E4438C ESG requires
firmware C.03.30 or later to use this functionality.
o
The E8267C PSG requires
firmware C.03.31 or later to use this functionality.
· The “.com” in the TCP/IP address string is no longer misinterpreted.
This software is compatible with signal generators with the following hardware and firmware options:
Screen captures and save/restore instrument
states from IntuiLink are supported on all the models listed below.
Waveform downloads are supported on the models listed below |
||
Model Number |
Supported Instrument Interface |
|
E8267C |
GPIB 10BaseT LAN |
L.02.00 or later |
E4438C |
GPIB 10BaseT LAN |
L.02.00 or later |
E443xB; where x=0 through 7 |
GPIB (required for waveform downloads) RS-232 (does not support waveform downloads) |
L.02.00 or later |
Waveform downloads are NOT supported on the following models: |
||
Model Number |
Supported Instrument Interface |
|
E8257C |
GPIB 10BaseT LAN |
L.02.00 or later |
E8247C |
GPIB 10BaseT LAN |
L.02.00 or later |
E8251A and E8254A |
GPIB 10BaseT LAN |
L.02.00 or later |
E8241A and E8244A |
GPIB 10BaseT LAN |
L.02.00 or later |
E4400B and E442xB; where x=0 through 6 |
GPIB (required for waveform downloads) RS-232 (does not support waveform downloads) |
L.02.00 or later |
Back to
top of page
·
Added support for
the following model numbers:
o
E8247C
o
E8257C
o
E8267C
· From the Download Waveform menu, renamed the file Type from "E443xB internal values" to "14-bit internal values", and "E4438C internal values" to "16-bit internal values". The "14-bit internal values" waveform type should be selected for binary waveforms formatted for the E443xB and the "16-bit internal values" waveform type should be selected for binary waveforms formatted for the E4438C and the E8267C.
·
Updated software to
prevent "Signatures have expired" warning message from appearing
every time an Office application was launched.
· Conversion from 14-bit internal values to 16-bit internal values modified so that the UNLEVEL is no longer displayed on the ESG during this operation.
This software is compatible with signal generators with the following hardware and firmware options:
Screen captures and save/restore instrument
states from IntuiLink are supported on all the models listed below.
Waveform downloads are supported on the models listed below |
||
Model Number |
Supported Instrument Interface |
|
E8267C |
GPIB 10BaseT LAN |
L.02.00 or later |
E4438C |
GPIB 10BaseT LAN |
L.02.00 or later |
E443xB; where x=0 through 7 |
GPIB (required for waveform downloads) RS-232 (does not support waveform downloads) |
L.02.00 or later |
Waveform downloads are NOT supported on the following models: |
||
Model Number |
Supported Instrument Interface |
|
E8257C |
GPIB 10BaseT LAN |
L.02.00 or later |
E8247C |
GPIB 10BaseT LAN |
L.02.00 or later |
E8251A and E8254A |
GPIB 10BaseT LAN |
L.02.00 or later |
E8241A and E8244A |
GPIB 10BaseT LAN |
L.02.00 or later |
E4400B and E442xB; where x=0 through 6 |
GPIB (required for waveform downloads) RS-232 (does not support waveform downloads) |
L.02.00 or later |
Back to
top of page
This software is compatible with signal generators with the following hardware and firmware options:
Screen captures and save/restore instrument
states from IntuiLink are supported on all the models listed below.
Waveform downloads are supported on the models listed below: |
||
Model Number |
Supported Instrument Interface |
|
E4438C |
GPIB 10BaseT LAN |
J.01.02 or later K.01.00 or later |
E443xB; where x=0 through 7 |
GPIB (required for waveform downloads) RS-232 (does not support waveform downloads) |
J.01.02 or later |
Waveform downloads are NOT supported on the models listed below: |
||
Model Number |
Supported Instrument Interface |
|
E8251A and E8254A |
GPIB 10BaseT LAN |
J.01.02 or later K.01.00 or later |
E8241A and E8244A |
GPIB 10BaseT LAN |
J.01.02 or later K.01.00 or later |
E4400B and E442xB; where x=0 through 6 |
GPIB (recommended) RS-232 |
J.01.02 or later |
Back to
top of page
This software is compatible with signal generators with the following hardware and firmware options:
Screen captures and save/restore instrument
states from IntuiLink are supported on all the models listed below.
Waveform downloads are supported on the models listed below: |
||
Model Number |
Supported Instrument Interface |
|
E443xB; where x=0 through 7 |
GPIB (required for waveform downloads) RS-232 port (does not support waveform downloads) |
J.01.02 or later |
Waveform downloads are NOT supported on the models listed below: |
||
Model Number |
Supported Instrument Interface |
|
E8251A and E8254A |
GPIB 10BaseT LAN |
J.01.02 or later K.01.00 or later |
E8241A and E8244A |
GPIB 10BaseT LAN |
J.01.02 or later K.01.00 or later |
E4400Band E442xB; where x=0 through 6 |
GPIB (recommended) RS-232 |
J.01.02 or later |
Back to
top of page
This software is compatible with signal generators with the following hardware and firmware options:
Screen captures and save/restore instrument
states from IntuiLink are supported on all the models listed below.
Waveform downloads are supported on the models listed below: |
||
Model Number |
Supported Instrument Interface |
|
E443xB; where x=0 through 7 |
GPIB (required for waveform downloads) RS-232 port (does not support waveform downloads) |
J.01.02 or later |
Waveform downloads are NOT supported on the models listed below: |
||
Model Number |
Supported Instrument Interface |
|
E4400B
and E442xB; where x=0 through 6 |
GPIB (recommended) RS-232 |
J.01.02 or later |
Back to
top of page