July 14, 2000

Since the original HT-37 schematic submitted 
to BAMA was incomplete, I have rescanned it 
from a good original. The diagram had to be 
broken into three pieces to fit onto the 
scanner. There is about 1/4 inch overlap 
at the edges of the segments, so it can be 
printed and reassembled by someone with a 
steady hand.

Users with lots of memory and CPU power 
should be able to merge the three images 
online using a photo processing program 
and print or scale them as desired.

Gary, KA9NZI

Note:  Gary's files are in the DjVu file named 
ht37schem.djvu.  The incomplete files have been 
deleted from ht37.djvu and replaced by the 
complete ones from Gary.
Ken, K4XL