2 Before Repair and Adjustment

TOP PREVIOUS NEXT

Disconnect AC power, discharge Power Supply Capacitors C527-C530, C561, (C702, C716 for GC, GT, GCS & GK only) through a 10 Ω, 5W resistor to ground.

DO NOT SHORT-CIRCUIT DIRECTLY (with a screwdriver blade, for instance), as this may destroy solid state devices.

After repairs are completed, restore power gradually using a variac, to avoid overcurrent.

[For GC, GCS, GT & GCP only]

Current consumption at AC 110/240 V, 50/60 Hz in NO SIGNAL mode should be ~650 mA respectively.

[For GK only]

Current consumption at AC 220 V, 50 Hz in NO SIGNAL mode should be ~650 mA.

[For GN only]

Current consumption at AC 230 V, 50 Hz in NO SIGNAL mode should be ~850 mA.


TOP PREVIOUS NEXT