This subsystem sets the bandwidth of the IF measurement filter (resolution bandwidth).The forms BANDwidth and BWIDth are equivalent.
Command tree: [SENSe<Ch>:]BANDwidth|BWIDth
Defines the resolution bandwidth of the analyzer (Meas. Bandwidth).
<Ch> |
Channel number. If unspecified the numeric suffix is set to 1.
|
<bandwidth> |
Resolution bandwidth |
Range [def. unit] |
1 Hz to 500 kHz [Hz]. UP and DOWN increment/decrement the bandwidth in 1-2-5 steps for each decade. The analyzer rounds up any entered value between these steps and rounds down values exceeding the maximum bandwidth. |
*RST value |
10 kHz
|
SCPI, Command Types |
Confirmed, command or query
|
Example: |
BAND 1.1 Set a resolution bandwidth of approx. 1.1 Hz for channel 1. BAND? The analyzer returns the rounded bandwidth of 2 Hz.
|