Editorial Page ix |
The effect of chemical modification on starch studied using thermal analysis Pages 1-8 Poonam Aggarwal, David Dollimore |
The use of thermal analysis to study the change in air-freshner gels Pages 9-13 Poonam Aggarwal, Schubert Pereira, David Dollimore |
An investigation of the evaporation of stearic acid using a simultaneous TG-DTA unit Pages 15-23 Supaporn Lerdkanchanaporn, David Dollimore |
A simultaneous TG-DTA study of the degradation in nitrogen of cellulose to carbon, alone and in the presence of other pharmaceutical excipients Pages 25-32 Supaporn Lerdkanchanaporn, David Dollimore, Kenneth S Alexander |
A comparison of the thermal decomposition of preservatives, using thermogravimetry and rising temperature kinetics Pages 33-48 David Dollimore, Carolyn O'Connell |
Kinetic studies of thermal degradation of natural cellulosic materials Pages 49-57 Yuanwen Wu, David Dollimore |
Applications of thermal methods of analysis to raw and processed minerals Pages 59-66 J.G. Dunn |
Thermal analytical investigation of unaltered Ca(OH)2 in dated mortars and plasters Pages 67-76 J. Adams, D. Dollimore, D.L. Griffiths |
Melting by temperature-modulated calorimetry Pages 77-85 Bernhard Wunderlich, Iwao Okazaki, Kazuhiko Ishikiriyama, Andreas Boller |
Isotropization of nematic liquid crystals by TMDSC Pages 87-94 Wei Chen, Mark Dadmun, Ge Zhang, Andreas Boller, Bernhard Wunderlich |
Kinetics of irreversible melting of polyethylene crystals revealed by temperature modulated DSC Pages 95-107 Akihiko Toda, Chiyoko Tomita, Masamichi Hikosaka, Yasuo Saruyama |
Modulated differential scanning calorimetry: 13. Analysis of morphology of poly(ethyl methacrylate)/polyurethane interpenetrating polymer networks Pages 109-121 D.J. Hourston, M. Song, F.-U. Schafer, H.M. Pollock, A. Hammiche |
A study of ash deposits on the heat exchange tubes using SDT/MS and XRD techniques Pages 123-133 Ying Xie, Wei Xie, Wei-Ping Pan, Alan Riga, Kiek Anderson |
Oxidative behavior of polymers by thermogravimetric analysis, differential thermal analysis and pressure differential scanning calorimetry Pages 135-149 Alan Riga, Ricardo Collins, Gregory Mlachak |
Thermal analysis as an aid to forensics: Alkane melting and oxidative stability of wool Pages 151-163 Dr Alan Riga |
Characterising the glass transition and relaxation kinetics by conventional and temperature-modulated differential scanning calorimetry Pages 165-174 John M. Hutchinson |
Medical device processing development based on rheology and thermal analysis Pages 175-178 Stanley P Westphal, Atul Khare, Michael T.K Ling, Lecon Woo |
Effect of ionizing radiation on the thermal oxidative stability of medical polymers Pages 179-185 L. Woo, Michael T.K. Ling, Samuel Y. Ding, Stanley P. Westphal |
The evolution of hot-stage microscopy to aid solid-state characterizations of pharmaceutical solids Pages 187-196 Imre M Vitez, Ann W Newman, Martha Davidovich, Chris Kiesnowski |
Applications for skimmer coupling systems, combining simultaneous thermal analysers with mass spectrometers Pages 197-201 E Kaisersberger, E Post |
Thermal behavior of asphalt cements Pages 203-213 P.M Claudy, J.M Létoffé, D Martin, J.P Planche |
Fictive glass-transition temperature and fragility for the phase diagram of the system fructose/water Pages 215-221 Patrick M Mehl |
Using thermal analysis methods to better understand asphalt rheology Pages 223-227 J.P Planche, P.M Claudy, J.M Létoffé, D Martin |
Book review Pages 229-230 |
Index Page 231 |
Index Pages 233-235 |