Whenever the NAG C Library has been supplied in compiled form, that form is considered to be the standard library file. The use of all supplied software must be in accordance with the terms and conditions of the Software Licence signed by NAG and each site. Any request to use NAG software on a computer other than the one licensed must be referred to NAG (see Section 6).
This implementation is a compiled, tested, ready-to-use version of the NAG C Library that is considered suitable for operation on the computer systems detailed below:
hardware: Hewlett Packard PA-RISC 2.0 machines (supporting 64-bit
arithmetic)
operating system: HP-UX 11.00 or compatible
C compiler: HP-UX cc version 11.01 or compatible
For information about implementations of the NAG C Library for use on other computer systems please contact NAG.
This implementation was produced at NAG Ltd., Oxford on the computing system detailed below:
hardware: Hewlett Packard 9000 Series 889 [K460-EG (with 4 processors)]
operating system: HP-UX 11.00
C compiler: HP-UX cc version 11.01.00
compiler options: -Ae +O3 +DA2.0W (static library)
-Ae +O3 +DA2.0W +Z (shareable library)
Please note that the use of the compiler option +DA2.0W generates 64-bit code for the PA-RISC 2.0 architecture. Therefore the libraries are strictly 64-bit, and can be used only on PA-RISC 2.0 architecture that supports 64-bit arithmetic.
The entire NAG C Library, Mark 6, was compiled with optimization level +O3, except for the following functions which were compiled with optimization level +O1:
e04abzt.c e04jbqt.c e04kbqt.c e04kbrt.c e04lbst.c e04nclt.c e04ucjt.c e04uckt.c e04uclt.c e04xazt.c f04aqct.c f06bact.c f06bcct.c f06eact.c f06ecct.c f06fjct.c f06pact.c f06pfct.c f06pjct.c f06qrct.c f06qsct.c f06qtct.c f06qvct.c f06qwct.c f06qxct.c f06qxft.c f06qzzt.c f11dayt.c x03aayt.c
The implementation has also been tested with the following compilers:
HP-UX c89 version 11.01.00 HP-UX aCC version 03.13
For further details, refer to other documentation supplied or contact NAG (see Section 6).
|-- in.html
|-- un.html
|-- doc --|-- nag_c_un.3
| |-- calls
|
|-- libnagc.a (static library)
|
|-- libnagc.sl (shareable library)
clhp806da --|
|-- include --|-- *.h
|
| |-- source ---|-- ??????e.c
|-- examples --|-- data -----|-- ??????e.d
| |-- results --|-- ??????e.r
|
|-- scripts ---|-- nagexample
The following shows the directory/file organization of the PDF documentation materials as they will be installed.
|-- Images --|-- *.gif
|
| |-- mark6.html (main index)
| |
NAGdoc --| |-- genint --|-- *.html (introductory material)
| |-- html --|
| | |-- [A02-X02]_cl06.html (chapter indexes)
|-- cl --|
| |-- genint --|-- *.pdf (introductory material)
|-- pdf --|
|-- indexes --|-- *.pdf (KWIC and GAMS)
|
|-- [A02-X02] --|-- *.pdf (chapter and function
files)
compiled libraries, libnagc.a: 10.0 Mb
libnagc.sl: 5.9 Mb
include files: 1.0 Mb
example program material: 2.2 Mb
library documentation files: 0.2 Mb
PDF documentation files: 30.5 Mb
To install all library material use the Unix tar utility, e.g.
tar xvf /cdrom/cl06.tar(assuming the CD-ROM has been mounted as /cdrom).
The object libraries (libnagc.a and libnagc.sl) should be moved to a directory, such as /usr/lib/pa20_64, in the default search path of the linker for 64-bit libraries, if possible, so that linkage is convenient.
The include files should be moved to a directory such as /usr/include so that they can be accessed during compilation, e.g.
mv include/*.h /usr/include
The script nagexample refers to the local directory containing the example programs. The file should be copied to (for example) /usr/local/bin, modified to reflect the local installation, and its protection set to world execute.
The man page, which directs users to the HTML form of the Users' Note, should be moved to a directory in the man search path, e.g.
cd doc mv nag_c_un.3 /usr/man/man3
tar xvf /cdrom/pdf.tar(assuming the CD-ROM has been mounted as /cdrom).
You may wish to move the PDF documentation files to the same location as that for other NAG products. You are encouraged to make them readily available to users, but in such a way that they are not generally accessible from outside your site. Further information is contained in the readme file on the distribution medium.
The following material should also be made accessible to users:
compiled libraries:
libnagc.a libnagc.slinclude files:
include/*.hexample program material:
examples/source/??????e.c examples/data/??????e.d examples/results/??????e.r scripts/nagexamplelibrary documentation files:
doc/callspdf documentation files
Note that the example material has been adapted, if necessary, from that printed in the NAG C Library Manual, so that programs are suitable for execution with this implementation with no further changes. Making the example material directly available to users provides them with easily adaptable templates for their own problems.
On-line documentation is bundled with this implementation. Please see Section 4.2.
The NAG Response Centres are available for general enquiries from all users and also for technical queries from sites with an annually licensed product or support service.
The Response Centres are open during office hours, but contact is possible by fax, email and phone (answering machine) at all times.
When contacting a Response Centre please quote your NAG site reference and NAG product code (in this case CLHP806DA).
The NAG websites provide information about implementation availability, descriptions of products, downloadable software, product documentation and technical reports. The NAG websites can be accessed at
http://www.nag.co.uk/, http://www.nag.com/ (in North America) or http://www.nag-j.co.jp/ (in Japan)
NAG Ltd Wilkinson House Jordan Hill Road OXFORD OX2 8DR NAG Ltd Response Centre United Kingdom email: support@nag.co.uk Tel: +44 (0)1865 511245 Tel: +44 (0)1865 311744 Fax: +44 (0)1865 310139 Fax: +44 (0)1865 310139 NAG Inc 1431 Opus Place, Suite 220 Downers Grove IL 60515-1362 NAG Inc Response Center USA email: infodesk@nag.com Tel: +1 630 971 2337 Tel: +1 630 971 2345 Fax: +1 630 971 2706 Fax: +1 630 971 2706 Nihon NAG KK Hatchobori Frontier Building 2F 4-9-9 Hatchobori Chuo-ku Tokyo 104-0032 Japan email: help@nag-j.co.jp Tel: +81 (0)3 5542 6311 Fax: +81 (0)3 5542 6312