Whenever the NAG Fortran Library has been supplied in compiled form, that form is considered to be the standard library file. The use of all supplied software must be in accordance with the terms and conditions of the Software Licence signed by NAG and each site. Any request to use NAG software on a computer other than the one licensed must be referred to NAG (see Section 6).
This implementation is a compiled, tested, ready-to-use version of the NAG Fortran Library that is considered suitable for operation on the computer systems detailed below:
hardware: DEC Alpha systems operating system: Digital UNIX V4.0 or compatible Fortran compiler: Digital Fortran 77 and Fortran 90 V5.2 or compatible
For information about implementations of the NAG Fortran Library for use on other computer systems please contact NAG.
This implementation was produced at NAG Ltd., Oxford on the computing system detailed below:
hardware: Digital AlphaServer ES40 operating system: Digital UNIX V4.0 Fortran compiler: Digital Fortran V5.2 compiler options: -O5 -pthread -reentrancy threaded
The entire NAG Fortran Library, Mark 19, was compiled with full optimization (-O5), except for the following routines, which had to be compiled at lesser optimization levels:
d03rayt.f (-O4) f07ycft.f (-O4) x04cbft.f (-O0) x04dbft.f (-O0) x04ebft.f (-O0)
This library has been tested using the Basic Linear Algebra Subprograms (BLAS) and linear algebra routines (LAPACK) provided by NAG (see the Chapter Introductions for F06, F07 and F08 in the NAG Fortran Library Manual). It has also been tested using the set of BLAS and LAPACK supplied in the Compaq Extended Math Library (CXML) version 3.6.
For further details, refer to other documentation supplied or contact NAG (see Section 6).
|-- in.html
|-- un.html
|-- nag_fl_un.3
|-- essint
|-- summary
|-- doc --|-- news
| |-- replaced
| |-- calls
| |-- called
| |-- blas_lapack_to_nag
| |-- nag_to_blas_lapack
fldau19da --|
|-- libnag.a
|
|-- libnagdx.a
|
|-- interface_blocks --|-- *.mod
|
| |-- source ---|-- ??????e.f
|-- examples --|-- data -----|-- ??????e.d
| |-- results --|-- ??????e.r
|
| |-- bin ------|-- * (directories of FLEXlm binaries
| | for supported platforms)
|-- license ---|
| | |-- flexfaq ---|-- *.htm (FLEXlm FAQ)
| |-- htmlman --|
| |-- flexuser --|-- *.htm (FLEXLM End
| User Manual)
|
|-- scripts ---|-- *
compiled libraries, libnag.a: 22.2 Mb
libnagdx.a: 22.1 Mb
interface blocks: 2.3 Mb
example program material: 5.9 Mb
documentation files: 2.5 Mb
licensing materials 16.1 Mb
(not needed on disk permanently)
To install all material use the Unix tar utility, e.g.
tar xvf /cdrom/fl19.tar(assuming the CD-ROM has been mounted as /cdrom).
The object libraries (libnag.a and libnagdx.a) should be moved to a directory, such as /usr/lib, in the default search path of the linker, if possible, so that linkage is convenient.
Shared libraries may be formed from the supplied archives by installing and running the script make_shlib, e.g.
cd fldau19da/scripts ; ./make_shlib
In addition to creating the shared libraries, this updates a local copy of the so_locations file from /usr/shlib. To make the shared libraries available to all users move them to /usr/shlib. If applications using the shared libraries are to be "quickstarted", the updated so_locations file should be moved to /usr/shlib. (If the original /usr/shlib/so_locations contained an entry for libnag.so, the new version must be moved to /usr/shlib.)
The script nagexample refers to the local directory containing the example programs. The file should be copied to (for example) /usr/local/bin, modified to reflect the local installation, and its protection set to world execute.
The man page, which directs users to the HTML form of the Users' Note, should be moved a directory in the man search path, e.g.
cd doc mv nag_fl_un.3 /usr/local/man/man3
The NAG Fortran Library Interface Blocks define the type and arguments of each user callable NAG Fortran Library routine. These are not essential to calling the NAG Fortran Library from Fortran 90 programs. Their purpose is to allow the Fortran 90 compiler to check that NAG Fortran Library routines are called correctly.
The interface block files (interface_blocks/*.mod) are supplied in pre-compiled module form. They should be moved to a suitable location so that access is convenient, e.g.
mkdir /usr/local/lib/fl77_modules mv interface_blocks/* /usr/local/lib/fl77_modules
The -I"pathname" option should then be specified on each f90 invocation (where "pathname" is /usr/local/lib/fl77_modules) to tell the compiler where to find the modules.
For the NAG Fortran Library you will be provided with an uncounted license key for use on a specific machine.
An uncounted license key consists of one FEATURE or INCREMENT line for each product licensed, for example:
FEATURE NAG_FL NAG 19.000 31-jul-2000 0 CBDA2041DC1BC45D2B68 \
"DAUA," 80896b27
This enables an unlimited number of instances of version 19 of the application NAG_FL until the date specified on the system with hostid 80896b27 only. Note that the line is continued by escaping the newline character with '\'.
You will have to inform NAG of the hostid of the system. To obtain the hostid, locate the FLEXlm utility program 'lmutil' in fldau19da/license/bin/alpha_u3, and run it with argument 'lmhostid'.
Once you have obtained the license key, store the text of it in a file, say /usr/local/lib/nag/license.dat
The location of this file must be made known to the NAG application by setting the environment variable LM_LICENSE_FILE to the full pathname of the file before the application is invoked.
For example, in the C-shell, type:
setenv LM_LICENSE_FILE /usr/local/lib/nag/license.dator in the Bourne shell, type:
LM_LICENSE_FILE=/usr/local/lib/nag/license.dat export LM_LICENSE_FILE
No other actions are required to install an uncounted license.
If the user advice refers to more than one compiled NAG library then each should be checked as above. If any externally-provided library of Basic Linear Algebra Subprograms (BLAS) is to be used then the following example programs should also be run:
F06EAF - testing real Level 1 BLAS
F06GAF - testing complex Level 1 BLAS
F06ERF - testing real sparse Level 1 BLAS
F06GRF - testing complex sparse Level 1 BLAS
F06PAF - testing real Level 2 BLAS
F06SAF - testing complex Level 2 BLAS
F06YAF - testing real Level 3 BLAS
F06ZAF - testing complex Level 3 BLAS
Note that the last four example programs take longer to execute than the average example program. The Users' Note may contain extra information needed when running these tests.
The following material should also be made accessible to users:
documentation files:
doc/essint doc/summary doc/news doc/replaced doc/calls doc/called doc/blas_lapack_to_nag doc/nag_to_blas_lapackcompiled libraries:
libnag.a libnagdx.a libnag.so (if created) libnagdx.so (if created)interface block files:
interface_blocks/*.modexample program material:
examples/source/??????e.f examples/data/??????e.d examples/results/??????e.r scripts/nagexample
Note that the example material has been adapted, if necessary, from that printed in the NAG Fortran Library Manual, so that programs are suitable for execution with this implementation with no further changes (but see Section 4.5.2 for comments about possible differences in results obtained). Making the example material directly available to users provides them with easily adaptable templates for their own problems.
The "example programs" for the routines in the F06 chapter are not typical example programs and they are not in the Library Manual. They are test programs, which are supplied to sites for use in an installation test of the Library. Some of them take much longer to run than other example programs. Routines which are equivalent to BLAS, are tested twice: once when called by their NAG F06 names, and once when called by their BLAS names.
On-line documentation is bundled with this implementation. Please see the Readme file on the distribution medium for further information.
The NAG Response Centres are available for general enquiries from all users and also for technical queries from sites with an annually licensed product or support service.
The Response Centres are open during office hours, but contact is possible by fax, email and phone (answering machine) at all times.
When contacting a Response Centre please quote your NAG site reference and NAG product code (in this case FLDAU19DA).
The NAG websites are an information service providing items of interest to users and prospective users of NAG products and services. The information is reviewed and updated regularly and includes implementation availability, descriptions of products, downloadable software, product documentation and technical reports. The NAG websites can be accessed at
or
http://www.nag.com/ (in North America)
or
http://www.nag-j.co.jp/ (in Japan)
NAG Ltd Wilkinson House Jordan Hill Road OXFORD OX2 8DR NAG Ltd Response Centre United Kingdom email: support@nag.co.uk Tel: +44 (0)1865 511245 Tel: +44 (0)1865 311744 Fax: +44 (0)1865 310139 Fax: +44 (0)1865 310139 Nihon NAG KK Yaesu Nagaoka Building No. 6 1-9-8 Minato Chuo-ku Tokyo Japan email: help@nag-j.co.jp Tel: +81 (0)3 5542 6311 Fax: +81 (0)3 5542 6312 [NP3440/IN - License Managed]