Your attention is drawn to the terms and conditions of the Software License regarding the use of NAG software. Any request to use this software other than on the licensed computer must be referred to NAG, as should requests for information about the availability of other implementations.
This implementation is a compiled, tested, ready-to-use version of the NAG Fortran Library that is considered suitable for operation on the computer systems detailed below:
hardware: Intel EM64T systems and compatible (including AMD 64-bit)
operating system: Linux for em64t with glibc-2.3.3 and compatible
Fortran compiler: Intel(R) Fortran Compiler for Intel(R) EM64T-based applications,
Version 8.1 and compatible (including version 9.0)
This implementation was produced at NAG Ltd., Oxford on the computing system detailed below:
hardware: EM64T Xeon
operating system: Linux 2.6.5-1 (Fedora Core release 2 (Tettnang))
glibc-2.3.3-27
Fortran compiler: Intel(R) Fortran Compiler for Intel(R) EM64T-based applications,
Version 8.1
Build 20050517 Package ID: l_fce_pc_8.1.028
This implementation has been tested at NAG Ltd., Oxford on the computing system detailed below:
hardware: AMD Athlon 64
operating system: SuSE Linux 9.3 (x86-64)
(2.6.11.4-20a-default) (glibc-2.3.4-23)
Compiler version : Intel(R) Fortran Compiler for Intel(R) EM64T-based applications,
Version 8.1
Build 20050406 Package ID: l_fce_pc_8.1.027
The entire NAG Fortran Library, Mark 21, was compiled
full optimization (-O4) except for the following source files
which had to be compiled at lesser optimization levels:
f11dayn.f (-O0) g02cdfn.f (-O0) g02javn.f (-O0)This library has been tested using the Basic Linear Algebra Subprograms (BLAS) and linear algebra routines (LAPACK) provided by NAG (see the Chapter Introductions for F06, F07 and F08 in the NAG Fortran Library Manual).
The library has been also tested with MKL version 7.2.1. The MKL version 7.2.1 libraries are supplied as a part of this product (see contents).
The library has been also tested with version 9.0 (Build 20050623) of the Intel compiler.
|- doc -|- in.html (Installer's Note, (this document))
| |- un.html (Users' Note)
|
| |- libnag_nag.a (static self-contained library
| | including NAG BLAS/LAPACK)
|- lib -|- libnag_nag.so (shareable self-contained library
| | including NAG BLAS/LAPACK)
| |- libnag_mkl.a (static library requiring
| | MKL BLAS/LAPACK)
| |- libnag_mkl.so (shareable library requiring
| MKL BLAS/LAPACK)
fll6i21dcl -|
|- nag_interface_blocks -|- *
|
| |- source --|- ??????e.f
|- examples -|- data ----|- ??????e.d
| |- results -|- ??????e.r
|
|- scripts -|- nagexample*
|
|- mkl_em64t -|- * (Intel Math Kernel Library)
|
| |- bin -|- * (directories of binaries
| | for supported platforms)
|- license -|- README.TXT
|
|- doc -|- * (Installation and User Guides)
The following shows the directory/file organization of the Library documentation materials as they will be installed.
nagdoc_fl21 -|- html -|- mark21.html (main index)
| |
| |- [A00-X05] -|- *.html (chapter contents files)
| |
| |- examples -|- data -|- *e.d (example program data)
| | |
| | |- source -|- *e.f (example program source)
| |
| |- frontmatter -|- *.html (sundry information)
| |
| |- genint -|- *.html (introductory material)
| |
| |- images -|- *.gif (nag images)
| | |
| | |- topbar -|- *.gif (Fortran Library images)
| |
| |- indexes -|- gams -|- fl_gams.html (main GAMS index)
| | | |
| | | |- *.html (GAMS files)
| | |
| | |- kwic -|- fl_kwic.html (main KWIC index)
| | |
| | |- *.html (KWIC files)
| |
| |- styles -|- libdoc.css (cascading style sheet)
|
|- pdf -|- mark21.pdf (main index)
|
|- [A00-X05] -|- *.pdf (chapter and routine files)
|
|- frontmatter *.pdf (sundry information)
|
|- genint -|- *.pdf (introductory material)
|
|- indexes -|- *.pdf (sundry information)
|
|- INUNs -|- *.pdf (sundry information)
compiled libraries: libnag_nag.a 37.1 Mb libnag_nag.so 20.5 Mb libnag_mkl.a 36.2 Mb libnag_mkl.so 20.4 Mb interface blocks: 3.8 Mb MKL (7.2.1) for em64t libraries : 49.4 Mb example program material: 4.3 Mb scripts: 7.8 Kb library documentation files: 46.2 Kb manual documentation files: 192.8 Mb licensing materials 1.1 Mb
./install.shBy default, the materials will be installed in /opt/NAG/ or /usr/local/NAG/ depending on your system. The installer may choose a different location. In this document we refer to the directory /opt/NAG/fll6i21dcl or /usr/local/NAG/fll6i21dcl as [INSTALL_DIR].
The directory [INSTALL_DIR] is referenced in the Users' Note (un.html).
The directory [INSTALL_DIR]/scripts contains one or more scripts to show how to use the libraries provided with this implementation. See Users' Note, Example Programs. Subsequent to the installation, if the installer moves the library to some other location then these scripts must be changed to reflect that fact.
To simplify access to the libraries you may wish to create symbolic links in a system location such as /usr/lib pointing at the installed libraries. They would then be in the default search path of the linker during the link phase, and be available for execution at run time (in the case of shareable libraries). Note that if both the static and shareable version of a library are placed in a directory then the shareable version is usually used by default.
The install script can install the Library documentation material in the same location as the NAG Library material or at some other location of the installer's choice.
You may wish to move the Library documentation files to the same location as that for other NAG products. You are encouraged to make them readily available to users.
The NAG Fortran Library Interface Blocks define the type and arguments of each user callable NAG Fortran Library routine. These are not essential to calling the NAG Fortran Library from Fortran 90/95 programs. Their purpose is to allow the Fortran 90/95 compiler to check that NAG Fortran Library routines are called correctly.
The interface block files (nag_interface_blocks/*) are supplied in both source form and pre-compiled module form.
The -Ipathname option should then be specified on each f90/f95 invocation (where pathname is [INSTALL_DIR]/nag_interface_blocks) to tell the compiler where to find the modules.
Use the tar utility to extract the materials, e.g.
tar xvf /cdrom/fl21.tarEach library is provided in both static and shareable format. You also have a choice of libraries; self contained libraries which use NAG supplied BLAS and LAPACK or libraries which require the use of MKL supplied BLAS and LAPACK. You may choose to install some or all of the libraries.
To simplify access to the libraries you may wish to create symbolic links in a system location such as /usr/lib pointing at the installed libraries. Then they would be in the default search path of the linker during the link phase, and be available for execution at run time (in the case of shareable libraries). Note that if both the static and shareable version of a library are placed in a directory then the shareable version is usually used by default.
To install the Library documentation material manually, use the tar utility, e.g.
tar xvf /cdrom/fl21_doc.tar(assuming the CD-ROM has been mounted as /cdrom).
You may wish to move the Library documentation files to the same location as that for other NAG products. You are encouraged to make them readily available to users.
The NAG Fortran Library Interface Blocks define the type and arguments of each user callable NAG Fortran Library routine. These are not essential to calling the NAG Fortran Library from Fortran 90/95 programs. Their purpose is to allow the Fortran 90/95 compiler to check that NAG Fortran Library routines are called correctly.
The interface block files (nag_interface_blocks/*) are supplied in both source form and pre-compiled module form.
The -Ipathname option should then be specified on each f90/f95 invocation (where pathname is [INSTALL_DIR]/nag_interface_blocks) to tell the compiler where to find the modules.
The directory [INSTALL_DIR]/scripts contains one or more scripts to show how to use the libraries provided with this implementation. These scripts refer to the local directory containing the example programs. The files should be copied to (for example) /usr/local/bin, modified to reflect the local installation, and their protection set to world execute.
In order to enable the software, NAG will issue you with a license key. The license key is a simple text file containing details of the software that will be enabled.
To request a license key, run the program khostid located in the license/bin/em64t/ subdirectory of the software distribution. This utility must be run from a command prompt. Return the information that it displays by e-mail (or FAX) to NAG.
A short term (demonstration or trial) license key contains one or more lines like the following:
FLL6I21DC TRIAL 2005/11/12 "EMnxidA3oeoj0F1Yvi5ibxPjB7"Specifically, it has a line containing the word TRIAL and is referred to here as an uncounted license key. Longer term uncounted license keys must be locked to a specific computer, i.e. they will enable the software on one computer only. These license keys include the word NODE instead of the word TRIAL above. Other types of keys may also be issued.
Once you have obtained the license key, store the text of it in a file, say [INSTALL_DIR]/license.lic.
For an uncounted license, the location of the license file must be made known to the NAG application by setting the environment variable NAG_KUSARI_FILE to the full pathname of the file before the application is invoked.
For example, in the C-shell, type:
setenv NAG_KUSARI_FILE [INSTALL_DIR]/license.licor in the Bourne shell, type:
NAG_KUSARI_FILE=[INSTALL_DIR]/license.lic export NAG_KUSARI_FILENo other actions are required to install an uncounted license.
Further details about Kusari and how it may be configured to suit your local circumstances are included in the Kusari Licence Management User Guide.
The following material should also be made accessible to users:
documentation files:
The nagdoc_fl21 directory contains the online documentation. This should be made available to users, in addition to the following:
compiled libraries:
libnag_nag.a libnag_nag.so libnag_mkl.a libnag_mkl.soMKL libraries supplied by NAG
mkl_em64t/*interface block files:
nag_interface_blocks/*example program material:
examples/source/??????e.f examples/data/??????e.d examples/results/??????e.r scripts/nagexample*
Note that the example material has been adapted, if necessary, from that published in the NAG Fortran Library Manual, so that programs are suitable for execution with this implementation with no further changes (but see Section 4.3.1 for comments about possible differences in results obtained). Making the example material directly available to users provides them with easily adaptable templates for their own problems.
On-line documentation is bundled with this implementation. Please see Section 4.
The NAG Response Centres are available for general enquiries from all users and also for technical queries from sites with an annually licensed product or support service.
The Response Centres are open during office hours, but contact is possible by fax, email and phone (answering machine) at all times.
When contacting a Response Centre it helps us deal with your enquiry quickly if you can quote your NAG site reference and NAG product code (in this case FLL6I21DCL).
The NAG websites provide information about implementation availability, descriptions of products, downloadable software, product documentation and technical reports. The NAG websites can be accessed at the following URLs:
http://www.nag.co.uk/, http://www.nag.com/ or http://www.nag-j.co.jp/
NAG Ltd Wilkinson House Jordan Hill Road OXFORD OX2 8DR NAG Ltd Response Centre United Kingdom email: support@nag.co.uk Tel: +44 (0)1865 511245 Tel: +44 (0)1865 311744 Fax: +44 (0)1865 310139 Fax: +44 (0)1865 310139 NAG Inc 1431 Opus Place, Suite 220 Downers Grove IL 60515-1362 NAG Inc Response Center USA email: infodesk@nag.com Tel: +1 630 971 2337 Tel: +1 630 971 2345 Fax: +1 630 971 2706 Fax: +1 630 971 2706 Nihon NAG KK Hatchobori Frontier Building 2F 4-9-9 Hatchobori Chuo-ku Tokyo 104-0032 Japan email: help@nag-j.co.jp Tel: +81 (0)3 5542 6311 Fax: +81 (0)3 5542 6312