IBM Books

User's Guide


Index

Numerics
A B C D E F G H I K L M N O P R S T U V W Y
Numerics
  • 10/100BASE-TX feature module
  • faceplate for (962)
  • 100BASE-FX feature module
  • faceplate for (965)
  • 2-Port 1000BASE-SX feature module
  • LEDs for (968)
  • 4-Port 100BASE-FX feature module
  • LEDs for (966)
  • 8-Port 10/100BASE-TX feature module
  • LEDs for (960)
  • 8-Port 100BASE-FX feature module
  • LEDs for (963)
  • 802.1Q Port (1299)
  • 802.1Q port configuration (1298)
  • 802.3x flow control (887)
  • configuring for (1240)
  • default for (1239)
  • description of (1238)
  • 8275-416
  • physical characteristics of (970)
  • A
  • acceptable frame types (1301)
  • access mode, user account management
  • defaults values (1351)
  • description of (1350)
  • range of values (1352)
  • read only (1354)
  • Read Write (1353)
  • accessing the switch (987)
  • from a Web browser (1056)
  • in-band connection (1035)
  • out-of-band connection (997)
  • SNMP-based management interface (1050)
  • terminal interface (EIA 232 port) (999)
  • terminal interface (Telnet) (1048)
  • active hosts (1328)
  • address aging timeout
  • configuring for (1234)
  • default for (1233)
  • description of (1232)
  • APPLY command (1494)
  • ARP Cache (1224)
  • ARP Cache Menu (1223)
  • Authentication Failure, trap condition (1187)
  • B
  • base port numbers (1247)
  • Baud rate
  • baud rate (1011), (1026)
  • default for (1142)
  • description of (1140)
  • value range (1141)
  • BootP (1063)
  • brackets
  • angle (1435)
  • square (1436)
  • Bridge MIB (912)
  • Broadcast Storm Recovery
  • broadcast storm recovery (891)
  • configuring for (1237)
  • default for (1236)
  • description of (1235)
  • broadcast traffic (1503)
  • C
  • cable requirements (934)
  • lengths (947)
  • types of (946)
  • cables
  • 1000BASE-SX (939)
  • 100BASE-FX (937)
  • 100BASE-TX (938)
  • 10BASE-TX (936)
  • capabilities of 8275-416 (877)
  • Category 3 (940)
  • Category 4 (941)
  • Category 5 (942)
  • CLEAR CTRS command (1492)
  • Clear, trap log operation (1206)
  • client IP address (1153)
  • client IP mask (1155)
  • closing a login session (1362)
  • closing a Telnet session (1363)
  • code download (1383)
  • Commands
  • APPLY (1474)
  • CLEAR CTRS (1472)
  • HELP (1478)
  • LOGOUT (1471)
  • MAIN MENU (1476)
  • NEXT PAGE (1469)
  • PREV MENU (1477)
  • PREV PAGE (1470)
  • READ ONLY (1467)
  • REFRESH (1475)
  • SEND/STOP (1473)
  • UNSAVED DATA (1468)
  • configuration
  • IP information (1059)
  • network connection (1062)
  • server (1061)
  • terminal interface (1060)
  • configuration changes (1071)
  • applying (1074)
  • processing (1075)
  • via terminal interface (1072)
  • via Web interface (1079)
  • configuration file (1380)
  • configuration file download (1385)
  • configuration file upload (1388)
  • Configure Network Connectivity Menu
  • Default Gateway (1131)
  • description of (1128)
  • IP address (1129)
  • Subnet Mask (1130)
  • configuring a modem (1018)
  • configuring a port
  • numbering ports (1245)
  • configuring a port monitoring
  • identifying the ports (1254)
  • numbering ports (1253)
  • configuring GARP (1294)
  • configuring IP (1057)
  • configuring Spanning Tree
  • description of (1257)
  • method of redundancy (1258)
  • configuring VLANs (1277)
  • conformation of password, user account management
  • defaults values (1348)
  • description of (1347)
  • range of values (1349)
  • connectivity (986)
  • attaching a modem (1019)
  • SNMP-based management interface (1051)
  • Telnet (1049)
  • Web-based management interface (1054)
  • Cost, Spanning Tree Protocol
  • default for (1275)
  • description of (1274)
  • current status (1292)
  • D
  • danger notices, translated (1429)
  • data bits (1013), (1028)
  • default configuration
  • description of (1407)
  • default gateway (1033), (1068)
  • detailed switch statistics (1323)
  • Device Configuration Menu (1104)
  • 802.3x Flow Control Menu (1231)
  • Broadcast Storm Recovery Menu (1230)
  • Port Configuration Menu (1226)
  • Port Monitoring Menu (1227)
  • Spanning Tree Port Configuration/Status Menu (1229)
  • Spanning Tree Switch Configuration/Status Menu (1228)
  • Switch Configuration Menu (1225)
  • DHCP (Dynamic Host Configuration Protocol) (1064)
  • down arrow (1450)
  • downloading code (1384)
  • downloading configuration file (1386)
  • downloading files to the switch (1377)
  • Dynamic Host Configuration Protocol (DHCP) (1065)
  • E
  • Enterprise MIB (910)
  • error log upload (1390)
  • Ethernet cable types
  • Category 3 (943)
  • Category 4 (944)
  • Category 5 (945)
  • Ethernet port LEDs (956)
  • F
  • F1 function keys (1483)
  • F2 function keys (1484)
  • F3 function keys (1485)
  • F4 function keys (1486)
  • factory default configuration, resetting of (1405)
  • fault tolerance (1259)
  • feature module LEDs (958)
  • feature module port numbers (1246)
  • File Path (1398), (1400)
  • File Type (1382)
  • flow control (1015), (1030)
  • flow control, 802.3x (888)
  • Forward Delay Time, Spanning Tree Protocol
  • default for (1271)
  • description of (1270)
  • forwarding database (893)
  • forwarding database statistics (1329)
  • front panel of switch
  • description of (950)
  • view of (949)
  • function keys
  • F1 (1479)
  • F2 (1480)
  • F3 (1481)
  • F4 (1482)
  • G
  • GARP configuration (1293)
  • GARP timers (1296)
  • GVRP, for 802.1Q port configuration (1303)
  • GVRP, for GARP configuration (1295)
  • H
  • Handling Files utility
  • description of (1378)
  • file name (1397)
  • file path (1399)
  • file type (1381)
  • TFTP Server IP Address (1401)
  • transfer mode (1395)
  • use of (1379)
  • hardware
  • physical characteristics of (971)
  • hardware description
  • cable requirements (932)
  • front panel (948)
  • LEDs (954)
  • Hello Time, Spanning Tree Protocol
  • default for (1269)
  • description of (1268)
  • HELP command (1498)
  • how to view detailed port statistics (1319)
  • how to view detailed switch statistics (1325)
  • how to view forwarding database statistics (1331)
  • how to view port summary statistics (1313)
  • how to view switch summary statistics (1322)
  • I
  • in-band connection
  • BootP (1040)
  • description of (1041)
  • DHCP (1039)
  • IP address (1038)
  • use of (1042)
  • in-band connectivity (989)
  • ingress filtering (1302)
  • IP address (1031), (1036), (1066)
  • default value (1174)
  • format for (1173)
  • number ranges (1175)
  • IP information (1037)
  • methods for changing (1034)
  • IP information, configuring (1058)
  • K
  • know routers, number of (1327)
  • L
  • Layer 2 switching (883)
  • LEDs
  • for 2-Port 1000BASE-SX feature module (969)
  • for 4-Port 100BASE-FX feature module (967)
  • for 8-Port 10/100BASE-TX feature module (961)
  • for 8-Port 100BASE-FX feature module (964)
  • for Ethernet ports (957)
  • for feature modules (959)
  • for the switch (952)
  • left arrow (1448)
  • Link Up/Link Down, trap condition (1188)
  • locally administered MAC address (1069)
  • login name (1093)
  • login panel
  • user name (1087)
  • user password (1088)
  • login password (1098)
  • login sessions, managing (1360)
  • LOGOUT command (1491)
  • Logout utility
  • description of (1374)
  • use of (1375)
  • M
  • MAC address type (1070)
  • MAC addresses (1499)
  • Main Menu
  • Device Configuration Menu (1103)
  • Management Menu (1101)
  • Statistics Menu (1105)
  • System Information Menu (1099)
  • System Utilities Menu (1109)
  • User Account Management Menu (1107)
  • MAIN MENU command (1496)
  • Management interfaces
  • VT100 terminal interface (900)
  • Management Menu (1102)
  • ARP Cache Menu (1127)
  • description of (1115)
  • functions available (1118)
  • how to access (1117)
  • Network Connectivity Configuration Menu (1120)
  • Ping Menu (1126)
  • Serial Port Configuration Menu (1121)
  • SNMP Community Configuration Menu (1122)
  • SNMP Trap Receiver Configuration Menu (1123)
  • Telnet Menu (1125)
  • Trap Menu (1124)
  • view of (1116)
  • Maximum Age Time, Spanning Tree Protocol
  • default for (1267)
  • description of (1266)
  • menu command
  • descriptions of (1430)
  • MIB II (909)
  • MIBs supported
  • 8275-416 MIB (1417)
  • Bridge MIB (905)
  • Enterprise MIB (903)
  • MIB II (902)
  • RFC 1213 (1413)
  • RFC 1493 (1414)
  • RFC 1643 (1415)
  • RFC 1757 (1416)
  • RMON MIB (904)
  • Web page for latest (1418)
  • modem
  • setting for (1020)
  • modem configuration (1017)
  • Multiple Users, trap condition (1189)
  • N
  • Name trap log entry (1197)
  • Network Configuration Protocol
  • Default for (1133)
  • description of (1132)
  • Network Connectivity Configuration Menu (1119)
  • NEXT PAGE command (1489)
  • numbering ports (1249)
  • O
  • obtaining service (1425)
  • obtaining software (1422)
  • opening a login session (1361)
  • operating environment
  • humidity (985)
  • temperatures (984)
  • out-of-band connection
  • description of (995)
  • locally attached (1003)
  • remotely attached (1016)
  • use of (996)
  • out-of-band connectivity (988)
  • P
  • packets switched, number of (1326)
  • parity (1012), (1027)
  • password
  • defaults for (1095)
  • description of (1094)
  • number supported (1096)
  • requirements for (1097)
  • Password, user account management
  • defaults values (1345)
  • description of (1344)
  • range of values (1346)
  • performance (925)
  • physical characteristics
  • depth (978)
  • height (976)
  • operating environment (975)
  • physical dimensions (972)
  • service clearance (974)
  • weight (973)
  • width (977)
  • physical dimensions (979)
  • Ping
  • configuration of (1218)
  • description of (1217)
  • IP address (1220)
  • limits on number of (1219)
  • starting and stopping (1221)
  • Ping Menu (1222)
  • port configuration
  • numbering ports (1244)
  • port configuration, 802.1Q (1297)
  • port detailed statistics (1316)
  • port indicator (1284)
  • port LEDs (955)
  • port monitoring (922)
  • port monitoring configuration
  • default values (1251)
  • identifying the ports (1252)
  • numbering ports (1250)
  • port numbers (1248)
  • port statistics (923), (1310), (1317)
  • port summary statistics (1311)
  • port switching
  • number of ports (927)
  • packet processing rates (926)
  • port VLAN ID (1300)
  • PREV MENU command (1497)
  • PREV PAGE command (1490)
  • Priority, Spanning Tree Protocol
  • default for (1265), (1273)
  • description of (1264), (1272)
  • Private (1152)
  • product overview (878)
  • protocols supported
  • 802.3x protocol (890)
  • IEEE P802.1D (885)
  • IEEE P802.1Q (886)
  • Public (1151)
  • R
  • READ ONLY (1487)
  • redundant paths (921), (1260)
  • REFRESH command (1495)
  • reliability (917)
  • reset VLAN (1305)
  • resetting default configuration (1408)
  • resetting the switch (1404), (1406)
  • RFC 1213 (906)
  • RFC 1493 (908)
  • RFC 1757 (907)
  • right arrow (1447)
  • RMON MIB (911)
  • S
  • safety notices, translated (1428)
  • Save Applied Changes utility
  • description of (1372)
  • use of (1373)
  • security (1506)
  • access mode (1339)
  • configuring user names (1337)
  • configuring user password (1338)
  • read only (1160)
  • Read Write (1161)
  • SNMP read/write (914)
  • status (1340)
  • user accounts (913)
  • Self Learning IP function
  • definition of (897)
  • self-learning IP mode
  • number of active hosts (1243)
  • number of known routers (1242)
  • number of packets switched (1241)
  • SEND/STOP command (1493)
  • Serial Port Configuration Menu
  • Baud rate (1136)
  • description of (1134)
  • Time out (1135)
  • Service
  • service
  • diagnosing problems (1420)
  • obtaining (1419)
  • obtaining software (1421)
  • telephone numbers for (1426)
  • service clearance
  • front (981)
  • rear (983)
  • sides (982)
  • service, Web site for (1424)
  • serviceability (918)
  • Simple Network Management Protocol (SNMP) agent (901)
  • Slot ID (1287)
  • SNMP community
  • client IP address (1154)
  • client IP mask (1156)
  • status (1162)
  • SNMP community access right
  • description of (1159)
  • read only (1157)
  • Read Write (1158)
  • SNMP Community Configuration Menu
  • access right (1145)
  • community name (1144)
  • description of (1143)
  • status (1146)
  • SNMP Community Name
  • SNMP community name
  • default names
  • Private (1148)
  • Public (1147)
  • default values (1167)
  • description of (1150)
  • format for (1166)
  • value length (1149)
  • SNMP interface
  • applying configuration changes (1084)
  • making configuration changes (1083)
  • saving configuration changes (1085)
  • SNMP trap receiver
  • community string (1171)
  • configuration of (1168)
  • description of (1169)
  • IP address (1170)
  • status (1172)
  • SNMP Trap Receiver Configuration Menu
  • configuration of (1163)
  • description of (1164)
  • number supported (1165)
  • SNMP trap receiver status
  • default values (1177)
  • description of (1176)
  • SNMP-base management interface (1044)
  • SNMP-based management interface
  • description of (1409)
  • groups supported (1412)
  • MIBs supported (1411)
  • use of (1410)
  • software functions
  • 802.3x flow control (889)
  • broadcast storm recovery (892)
  • forwarding database (894)
  • Layer 2 switching (884)
  • Spanning Tree Protocol (STP) (919)
  • configuring for (1256)
  • defining Status (1261)
  • Spanning Tree, trap condition (1190)
  • special keys
  • Backspace (1441)
  • brackets
  • angle (1433)
  • square (1434)
  • Cntl-Tab (1453)
  • Delete (1446)
  • down arrow (1440)
  • End (1445)
  • Enter (1444)
  • Esc (1443)
  • Insert (1442)
  • left arrow (1438)
  • right arrow (1437)
  • Shift-Tab (1452)
  • Tab (1451)
  • up arrow (1439)
  • statistics
  • description of (1306)
  • how to view (1307)
  • Statistics Menu (1106)
  • contents of (1309)
  • description of (1308)
  • detailed port statistics (1315)
  • summary of port statistics (1314)
  • statistics, detailed port (1318)
  • statistics, detailed switch (1324)
  • statistics, forwarding database (1330)
  • statistics, port summary (1312)
  • statistics, summary switch (1321)
  • Status, Spanning Tree Protocol
  • default for (1263)
  • description of (1262)
  • status, user account management
  • defaults values (1356)
  • description of (1355)
  • Disable (1358)
  • Enable (1359)
  • range of values (1357)
  • stop bits (1014), (1029)
  • STP (Spanning Tree Protocol) (920), (1255)
  • subnet mask (1032), (1067)
  • summary switch statistics (1320)
  • switch
  • cable requirements for (935)
  • capabilities of (881)
  • connectivity (991)
  • functions (882)
  • functions of (880)
  • hardware description of (933)
  • In-band method (992)
  • LED status (953)
  • methods of accessing (990)
  • out-of-band method (993)
  • overview of (879)
  • performance of (924)
  • reliability (915)
  • serviceability (916)
  • user interfaces available (994)
  • Web site for support (1052)
  • Y2K (year 2000) (929)
  • switch LED status (951)
  • switch, resetting of
  • description of (1403)
  • System Information Menu
  • description of (1111)
  • how to access (1113)
  • options available (1114)
  • view of (1112)
  • system trace upload (1392)
  • System Utilities Menu (1110)
  • Debug Information Menu (1371)
  • description of (1364)
  • Download File to Switch Menu (1368)
  • Logout (1367)
  • Reset Menu (1370)
  • Save Applied Changes (1366)
  • Upload File to Switch Menu (1369)
  • utilities available (1365)
  • T
  • tagging (1290)
  • Telnet configuration
  • default number of sessions (1209)
  • description of (1207)
  • length of sessions (1211)
  • limiting number of sessions (1210)
  • sessions allowed (1208)
  • Telnet Login Timeout (1215)
  • Telnet Menu (1212)
  • Telnet sessions
  • duration of (1213)
  • limiting new sessions (1216)
  • maximum number of (1214)
  • terminal emulation setting
  • baud rate (1006), (1021)
  • data bits (1008), (1023)
  • flow control (1010), (1025)
  • parity (1007), (1022)
  • stop bits (1009), (1024)
  • terminal interface
  • applying changes (1076), (1077)
  • blinking text (1455)
  • command descriptions (1431)
  • commands
  • APPLY (1462)
  • CLEAR CTRS (1460)
  • HELP (1466)
  • LOGOUT (1459)
  • MAIN MENU (1464)
  • NEXT PAGE (1457)
  • PREV MENU (1465)
  • PREV PAGE (1458)
  • REFRESH (1463)
  • SEND/STOP (1461)
  • UNSAVED DATA (1456)
  • configuring terminal emulation (998)
  • Cursor (1454)
  • description of (898)
  • Main Menu (1100)
  • making changes (1073)
  • menu commands (1432)
  • steps for connecting the terminal and switch (1005)
  • terminal interface
  • saving applied changes (1078)
  • use of (899)
  • using the (1086)
  • via Telnet (1043)
  • via the EIA 232 serial port (1000)
  • terminal interface (EIA 232)
  • description of (1001), (1046)
  • use of (1002), (1047)
  • TFTP Server IP Address (1402)
  • Time out
  • default for (1139)
  • description of (1137)
  • value range (1138)
  • Time Stamp trap log entry (1196)
  • traffic
  • broadcast (1504)
  • Transfer Mode (1396)
  • translations, safety notices (1427)
  • trap conditions
  • Authentication Failure (1182)
  • Console Display (1183)
  • description of (1181)
  • Link Down (1185)
  • Link Up (1184)
  • Multiple Users (1186)
  • trap configuration
  • conditions for (1180)
  • description of (1179)
  • trap log
  • description of (1191)
  • Name entry (1195)
  • number of entries (1192)
  • Time Stamp entry (1194)
  • valid operations of (1193)
  • trap log upload (1394)
  • Trap Menu (1178)
  • traps
  • Authentication failure (1199)
  • Broadcast storm start/end (1205)
  • Cold Start (1198)
  • Link down (1201)
  • Link up (1200)
  • Multiple users (1202)
  • New spanning tree root (1203)
  • Spanning tree topology change (1204)
  • U
  • UNSAVED DATA command (1488)
  • up arrow (1449)
  • uploading configuration file (1387)
  • uploading error log (1389)
  • uploading files from the switch (1376)
  • uploading system trace (1391)
  • uploading trap log (1393)
  • uppercase words (1500)
  • user access
  • access mode (1335)
  • configuring user names (1333)
  • configuring user password (1334)
  • status (1336)
  • user account management (1332)
  • User Account Management Menu (1108)
  • user name
  • defaults for (1090)
  • description of (1089)
  • number supported (1091)
  • requirements for (1092)
  • User Name, user account management
  • defaults values (1342)
  • description of (1341)
  • range of values (1343)
  • V
  • virtual local area networks (VLANs) (895)
  • VLAN configuration (1276)
  • VLAN current status (1291)
  • VLAN ID (1281)
  • VLAN index (1280)
  • VLAN management (1278)
  • VLAN name (1282)
  • VLAN participation (1288)
  • VLAN port indicator (1285)
  • VLAN Slot ID (1286)
  • VLAN summary and configuration (1279)
  • VLAN tagging (1289)
  • VLAN type (1283)
  • VLAN, resetting (1304)
  • VLANs
  • benefits (1502)
  • overview (1501)
  • security (1505)
  • VLANs (virtual local area networks) (896)
  • VT 100 terminal, configuration settings for (1004)
  • W
  • Web browser (1055)
  • Web interface
  • making configuration changes (1080)
  • processing configuration changes (1081)
  • saving configuration changes (1082)
  • Web sit for service (1423)
  • Web-based management interface (1045), (1053)
  • weight (980)
  • Y
  • Y2K (year 2000)
  • compliance statement (930)
  • Web site for (931)
  • year 2000 (928)

  • [ Top of Page | Previous Page | Next Page | Table of Contents | Index ]