This chapter describes Security Protocol (SEC) messages. For information on message content and how to use the message, refer to the Introduction.
| SEC.001 |
Level: C-INFO
Short Syntax: SEC.001 Tacacs+: A message
Long Syntax: SEC.001 TacacsPlus Message: A message
Description: Generic Message for Tacacs Plus
| SEC.002 |
Level: C-INFO
Short Syntax: SEC.002 Tacx+StartPacket: A message
Long Syntax: SEC.002 TacacsPlus StartPacket Message: A message
Description: Generic Message for Tacacs Plus Start Packet
| SEC.004 |
Level: U-INFO
Short Syntax: SEC.004 Tacacs conn to neighbor open on sprt sourceport dprt destinationport
Long Syntax: SEC.004 Tacacs connection to neighbor neighbor open on soure port sourceport destination port destinationport
Description: An OPEN message has been received on this connection for this neighbor.
Cause: The connection to the neighbor has completed successfully.
Action: None. This is an informational message.
| SEC.005 |
Level: C-INFO
Short Syntax: SEC.005 Tacx+ContinuePacket: A message
Long Syntax: SEC.005 TacacsPlus ContinuePacket Message: A message
Description: Generic Message for Tacacs Plus continue packet
| SEC.006 |
Level: C-INFO
Short Syntax: SEC.006 Tacx+ReplyPacket: A message
Long Syntax: SEC.006 TacacsPlus ReplyPacket Message: A message
Description: Generic Message for Tacacs Plus reply packet
| SEC.007 |
Level: C-INFO
Short Syntax: SEC.007 TacPlus: [ id,] A message
Long Syntax: SEC.007 TacacsPlus Message: id, A message
Description: Generic Message for Tacacs Plus provides request id.
| SEC.008 |
Level: U-INFO
Short Syntax: SEC.008 TacPlus: [ id,] A message
Long Syntax: SEC.008 TacacsPlus Message: [ id,] A message
Description: Generic Message for Tacacs Plus clean path messages
| SEC.009 |
Level: ERROR
Short Syntax: SEC.009 TacPlus: [ id,] A message
Long Syntax: SEC.009 Tacacs-Plus Message: [ id,] A message
Description: Generic Message for Tacacs Plus
| SEC.010 |
Level: C-INFO
Short Syntax: SEC.010 TacPlus: rq[ id,] tcp[ id2,] A message
Long Syntax: SEC.010 TacacsPlus Message: id, id2, A message
Description: Generic Message for Tacacs Plus shows req id and tcp id
| SEC.011 |
Level: C-INFO
Short Syntax: SEC.011 A message
Long Syntax: SEC.011 Message: A message
Description: Generic Message for Security Protocol
| SEC.016 |
Level: C-INFO
Short Syntax: SEC.016 UDP port port not hooked
Long Syntax: SEC.016 UDP port port not hooked
Description: AuthenticationProtocol could not hook the UDP port to receive packets on
| SEC.017 |
Level: C-INFO
Short Syntax: SEC.017 Rcvd Resp for unknown id id
Long Syntax: SEC.017 Received Response for unknown id id
Description: Authentication Protocol received a response that did not match any outstanding requests
| SEC.018 |
Level: C-INFO
Short Syntax: SEC.018 Rcvd Invalid Authenticator
Long Syntax: SEC.018 Received Invalid Authenticator
Description: Radius received a packet with an invalid authenticator and discarded it
| SEC.019 |
Level: C-INFO
Short Syntax: SEC.019 direction packetType
Long Syntax: SEC.019 direction packetType packet
Description: Authentication protocol UDP packet type received or sent
| SEC.020 |
Level: C-INFO
Short Syntax: SEC.020 No Srvr Cfd
Long Syntax: SEC.020 No Server Addresses Configured packet
Description: No Server addresses were configured for authentication protocol
| SEC.021 |
Level: C-INFO
Short Syntax: SEC.021 Radius hooked UDP port port
Long Syntax: SEC.021 Radius hooked UDP port port\
Description: Radius hooked the UDP port to receive radius packets on
| SEC.022 |
Level: C-INFO
Short Syntax: SEC.022 direction packetType to address via src port port
Long Syntax: SEC.022 direction packetType packet to address source src port port
Description: Radius packet type sent to address and port specified
| SEC.023 |
Level: C-INFO
Short Syntax: SEC.023 Auth result user= user
Long Syntax: SEC.023 Authentication result user= user
Description: Authentication passed or failed
| SEC.024 |
Level: C-INFO
Short Syntax: SEC.024 Auth Req Outstanding for compId
Long Syntax: SEC.024 Auth Req Outstanding for compId
Description: Authentication request is already outstanding on this net, so disregarding new request
| SEC.025 |
Level: C-INFO
Short Syntax: SEC.025 Request List at Max = maxSize
Long Syntax: SEC.025 Request List at Max = maxSize
Description: request list has reached the maximum size and a request had to be discarded
| SEC.026 |
Level: C-INFO
Short Syntax: SEC.026 action Request id= id compID= size list size=
Long Syntax: SEC.026 action Request id= id compID= size list size=
Description: adding/removing a request to the security list
| SEC.027 |
Level: C-INFO
Short Syntax: SEC.027 action compID= id
Long Syntax: SEC.027 action compID= id
Description: a security action taking place
| SEC.028 |
Level: C-INFO
Short Syntax: SEC.028 Tacacs hooked UDP port port
Long Syntax: SEC.028 Tacacs hooked UDP port port\
Description: Tacacs hooked the UDP port to receive tacacs packets on
| SEC.029 |
Level: C-INFO
Short Syntax: SEC.029 direction packetType for id rqid to address via src port port
Long Syntax: SEC.029 direction packetType packet for request id rqid to address source src port port
Description: Radius packet type sent to address and port specified
| SEC.030 |
Level: C-INFO
Short Syntax: SEC.030 action compID= id net: net
Long Syntax: SEC.030 action completionID= id network number: net
Description: a security action taking place on net