Table Of Contents

COVER

1 INSTALLATION INSTRUCTION

1.1 Check Installation Location

1.2 Connect tap adapter to water faucet

1.3 Connect external drain water hose

1.4 Install washing machine horizontally

1.5 Connect supply water hose

1.6 Establish a ground (In case of two-wire power cords)

2 FEATURE AND TECHNICAL EXPLANATION

2.1 Speedy washing time

2.1.1 Split-level shower washing

2.1.2 New-Fill method (Normal, Speedy, Personal Cycle)

2.1.3 Reduce time of Intermediate-spin& Final-spin process

2.1.3.1 Reduce time of Intermittent spin process

2.1.3.2 Reduce time of Inertial running for spin brake action

2.2 Spin rotation controls with rotary detector

2.2.1 Detection of the pulsator pulley rotation with the rotary detector

2.2.2 Spin rotation controls

2.3 Laundry amount detects with rotary detector

2.4 Detect of spin defect with bubble

3 FEATURE AND TECHNICAL EXPLANATION 2

3.1 Home Dry Care Course(Preparation)

3.1.1 Confirm whether or not your clothes can be washed.

3.1.1.1 Washable items (item can be washed in water, but cannot be scrubbed or handled roughly during washing)

3.1.1.2 Clothes that cannot be washed (because the problems below occur when immersed in water)

3.1.1.3 What is the "Home Dry Care" course?

3.1.2 How to check for non-colorfastness

3.1.3 Method of pre-treating heavily soiled spots

3.1.4 Preparation of clothing before washing

3.1.5 Key points for washing

3.2 Home Dry Care course(Finishing)

3.2.1 Key points for drying(Do not use a dryer.)

3.2.2 Key points for ironing

3.2.2.1 Ironing sweaters and knits

3.2.2.2 Ironing skirts

3.2.2.3 Ironing slacks

3.2.2.4 Ironing tips

3.2.3 When this occurs

3.2.3.1 How to fix shrinkage

4 DISASSEMBLY INSTRUCTIONS AND ADJUSTMENTS

4.1 Caution to be observed when trouble shooting

4.1.1 Print circuit board

4.1.2 Water level detector, Safety switch Feed valve replacement.

4.1.3 Motor replacement

4.1.4 Mechanism case replacement

4.1.5 Rotary detector

4.1.6 Suspension replacement

5 CHECK INPUT AND OUTPUT VOLTAGE OF THE P.C BOARD

5.1 Measure output voltage of the electrical parts connector's on the P.C Boaed.

5.2 Measure each resistance after removed connectors.

6 TEST RUNNING WITHOUT WATER

6.1 METHOD TO TEST RUNNING WITHOUT WATER

6.1.1 Error indication descriptions

7 SCHEMATIC DIAGRAM

8 EXPLODED VIEWS AND REPLACEMENT PARTS LIST

8.1 SMALL STANDARIZED PARTS

8.2 LOCATION OF PARTS-A

8.3 REPLACEMENT PARTS LIST-A

8.4 LOCATION OF PARTS-B

8.5 REPLACEMENT PARTS LIST-B

8.6 LOCATION OF PARTS-C

8.7 REPLACEMENT PARTS LIST-C

8.8 PACKING INSTRUCTIONS

8.9 REPLACEMENT PARTS LIST