The Info menu gives access to information about the instrument and its operation. All functions are primarily intended for error diagnostic and service purposes; see Obtaining Support. Many Info dialogs also display softkeys to Print the contents, save them to a file (Print to File) or Close the dialog.
|
|
|
The Info menu contains the following functions:
Setup Info displays the channel and trace settings of the active setup and the main characteristics of the instrument including its IP address.
Option Info shows the installed software options with their type and name, the option key and key type, the duration of activation, and the expiry date (if applicable).
Hardware Info gives an overview of the analyzer's hardware configuration, basic hardware-related instrument settings, and the version of the "Specifications" which correspond to the current firmware version.
Selftest... displays a list of the automatic selftests of the analyzer together with the current results.
Error Log... opens a chronological record of errors that occurred in the current and in previous sessions. While the error log is open, additional softkeys to print, close or clear (delete) the log are provided. The deleted error log shows the message No errors found.
Save System Report... initiates a selftest and generates a zipped error log file which you may send in for fault diagnosis.
|
Remote control: |
