Inside front cover Pages CO2-CO3 |
Thermal conductivity as an indicator of fat content in milk Pages 1-5 Mattias Gustavsson, Silas E. Gustafsson |
Evaluation and finite element modeling for new type of thermal material annealed pyrolytic graphite (APG) Pages 6-9 Shuhua Zhang, Mike Vinson, Paul Beshenich, Mark Montesano |
A dynamic system approach to the characterization of a class of rheological materials at base-temperatures Pages 10-13 Y.M. Haddad, Ping Yu |
Simultaneous measurement of specific heat, thermal conductivity, and thermal diffusivity of modified barium titanate ceramics Pages 14-17 Kohsuke Morimoto, Shinya Sawai, Kumao Hisano, Takashi Yamamoto |
Thermal properties of poly(ethylene oxide)/lauric acid blends: A SSA–DSC study Pages 18-24 Krzysztof Pielichowski, Kinga Flejtuch |
Melting and reorganization of the crystalline fraction and relaxation of the rigid amorphous fraction of isotactic polystyrene on fast heating (30,000 K/min) Pages 25-30 Alexander A. Minakov, Dmitry A. Mordvintsev, Rob Tol, Christoph Schick |
Crystalline polymer: Some reminiscences over the years Pages 31-34 Leo Mandelkern |
The heat capacity of polyethylene fibers measured by multi-frequency temperature-modulated calorimetry Pages 35-41 M. Pyda, E. Nowak-Pyda, B. Wunderlich |
Evaluation of the reversible contribution to the reversing heat capacity in isotactic polystyrene Pages 42-47 Hui Xu, Peggy Cebe |
Experimental aspects of temperature-modulated dilatometry of polymers Pages 48-51 P. Kamasa, P. Myśliński, M. Pyda |
Method of rapid (100 000 K s−1) controlled cooling and heating of thin samples Pages 52-60 Mikhail Merzlyakov |
Application and limitations on thermal and spectroscopic methods for shelf-life prediction Pages 61-63 Lecon Woo, Michael T.K. Ling, Bruce Eu, Craig Sandford |
Detection of degradation of ABS materials via DSC Pages 64-66 Henk Blom, Rosa Yeh, Robert Wojnarowski, Michael Ling |
Thermo-physical properties of epoxy nanocomposites reinforced by carbon nanotubes and vapor grown carbon fibers Pages 67-73 Hiroaki Miyagawa, Michael J. Rich, Lawrence T. Drzal |
Synthesis, thermal properties and applications of polymer-clay nanocomposites Pages 74-77 Paulo Meneghetti, Syed Qutubuddin |
Thermal stabilization and plasticization of poly(vinyl chloride) by ester thiols: Update and current status Pages 78-80 William H. Starnes Jr., Bin Du, Soungkyoo Kim, Vadim G. Zaikov, Xianlong Ge, Elizabeth K. Culyba |
New elevated temperature mold compound adhesion test method using a dynamic mechanical analyzer Pages 81-86 Andrew Schoenberg, Edmund Klinkerch |
The thermal analysis of films in the 21st century: Relevance to cell culture, biochips and roll-to-roll circuits Pages 87-91 Michael Jaffe, George Collins, Joseph Menczel |
Thermal analysis of poly(vinylidene fluoride) film Pages 92-94 Lawrence Judovits |
The thermal analysis of fibers in the twenty first century: From textile, industrial and composite to nano, bio and multi-functional Pages 95-99 Michael Jaffe, George Collins, Joseph Menczel |
Author Index Page 100 |
Subject Index Pages 101-102 |